adobe cs — colour #03

adobe cs — colour #01 and colour #02 started an explication of the excruciating world of colour management. excruciating, not because it is immeasurably difficult, but because so many seem to avoid it altogether — this is unnecessary.

colour management can be extraordinarily complex if you get into the nitty gritty — but most of us don’t need to delve that deep. so, do yourself a favour and get a basic working knowledge of colour management to give your files the best chance once they hit the press.

unfortunately, there’s no definitive solution to the problem. no one can say “here are the settings to set and the buttons to push” because, well, it depends. let’s see why — here’s a pretty standard choice for colour settings in InDesign (under edit > color settings…):
screen grab of  North America General Purpose colour settings

now that’s probably fine if you’re a general purpose kind of person working in north america. but if you’re a prepress kind of person in australia it’s pretty shitty. one of the key rules of colour management is give yourself the widest practicable colour gamut as your starting point. hover your mouse over where it says “sRGB…” and you’ll see this description pop up at the bottom of the window :
screen grab of description for sRGB color space

see how InDesign gives you clues about what settings to use — “not recommended for prepress work (because of its limited color gamut)“. if you change to the north america prepess settings you’ll see the rgb profile change to adobe rgb (1998) — a better choice for prepress work, because it has a wider gamut which also, conveniently, more closely resembles the cmyk gamut — as its description explains :
screen grab of north america prepress colour settings

but for aussie prepress dudes, we’re still not there. swop stands for “Specifications for Web Offset Publications” (for those who don’t realise, “web” is the term for printing from a paper roll). in australia, most commercial printing (apart from newspapers, magazines and catalogues) is done through sheet offset.

in adobe cs — colour #01 we saw that swop restricts the total ink coverage to 300% with a maximum black of 90%. but sheet offset can tolerate more ink and this is exactly why aussies are often disappointed by flat images when their shit hits the press — they are restricting their images to an unnecessarily narrow gamut by using swop — which they do either because it’s the default or because it’s what is recommended on all the (mostly north american) forums.

a decent sheet offset press/operator under good conditions can handle a tic (or tac if you prefer) of about 350% so let’s look at some colour spaces whose descriptions match that :
screen grab of US sheetfed offset descriptionscreen grab of fogra27 descriptionscreen grab of fogra39 description

judging by the descriptions, these should all give similar results but, unfortunately, although InDesign did a good job of pointing us at a good rgb profile, it’s not quite so helpful when it comes to cmyk. remember, the image from colour #01 and colour #02 had a black background of r0g0b0. here’s how those three cmyk profiles will render that colour :
screen grab of separations preview panel from each of the three profiles and fogra27 do indeed give us a tic of 350% — but look at the difference in the separations. that 85% total black is diabolical. you’re just about guaranteed to get shitty detail in your shadow areas using because it’s relying so heavily on all four plates to create the dark colours — whereas fogra27 loads as much achromatic data as possible onto the black plate which will almost certainly result in a crisper result.

looking at the data for fogra39 we can see that the description was incorrect — it only allows for a tic of 330% (not 350%) but we can probably put this down to a typo — it’s very likely the fogra39 description was just copied from fogra27, which has been with us for longer.

so, is fogra27 better than fogra39? again, it depends. as mentioned above, 350% tic is easily achievable under ideal conditions but very much of our printing is done in a subideal reality. if you’re a prepress dude in australia sending high quality work to an excellent printer who has plenty of time (and budget) to do a high quality job, fogra27 is a good choice. if you’re sending stuff to a decent printer who’s been screwed down on the delivery deadline, then fogra39 will give you and them less grief.

having said all that … in an ideal world we would always get to speak directly with the printer’s production dude for explicit instructions on the best protocol to use for each job — but this isn’t always possible or practical — so we have to get better at best-guess scenarios.

• related post : InDesign tip : #24 : checking the black plate in separations preview.
• related post : adobe cs — colour #01 : you don’t need to convert images to cmyk.
• related post : adobe cs — colour #02 : you really need to get your shit together.

macgrunt icon

adobe cs — colour #02

adobe cs — colour #01 started looking at colour management in adobe creative suite — specifically, how images no longer need to be converted to cmyk in photoshop. this post continues the indoctrination — colour management can be left to InDesign.

HOWEVER, you really need to get (and keep) your shit together.

let’s continue by following two documents converted to two different common colour profiles — fogra 27 and web swop. again, we are using the exact same rgb psd file in those two documents :
screen grab of two documents showing different breakdowns for red and black
the separations preview panels show the breakdowns for the red text and the black background for both documents (as indicated by the white circles).

now, when you export to PDF you get a few different options for colour conversion — no colour conversion, convert to destination, and convert to destination (preserve numbers) :
screen grab of export PDF dialog showing colour conversion options

if you choose no colour conversion for either of those documents you’ll get exactly the same numbers in the PDFs as are shown in the separations preview panels above. what does this mean? it means that if you want to control your output you need to make a decision about which profile to use for your InDesign files. because images will produce significantly different results under different export conditions and unless you take control, you’ve got no idea what’s going to happen to your imported images once it’s time to export for print.

if you take either of those documents and export it to the opposite profile using convert to destination (preserve numbers). you’ll get exactly the numbers of the opposite profile. that is, if you take the fogra document and export it to swop using “preserve numbers” you’ll get the swop numbers in your pdf. however, if you use convert to destination without the preserve numbers option you’ll get a different set of numbers entirely — neither the swop nor the fogra ones.

what does THAT mean? it means, again, the choices you make (or fail to make) have an impact on your final output — both your indesign profiles and your export protocol will affect the finished product and if they don’t match, the effect is going to be unpredictable. or, more simply, if you don’t take control of your workflow you’re going to get unexpected results.

so, you have to get your shit together when it comes to colour management — don’t get pushed around by the software — you have to be the one doing the pushing.

ok, so that’s a demonstration of the problem. next up we’ll start looking at the solution.

• related post : InDesign tip : #24 : checking the black plate in separations preview.
• related post : adobe cs — colour #01 : you don’t need to convert images to cmyk.
• related post : adobe cs — colour #03 : what’s the best colour profile?.

macgrunt icon

something you can’t automate…

so far this site has dealt almost exclusively with workflow optimisation and automation — finding ways to minimise the monkey-work, particularly in the advertising and publishing industries.

unfortunately there are one or two things which can’t be optimised (not much anyway) — there are no magic bullets or tricky shortcuts.

one of them, of course, is design. but if you’re one to bemoan having to do design the long way, then you’re really in the wrong job.

the other main one — equally important but not equally loved — is proofreading. you simply cannot do proofreading the easy way and anyone who tries to is a loony.

do yourself a favour — get better at proofreading :

Proofreading is not a job for the the people who  don’t pay attention.

macgrunt icon

adobe cs — colour #01

colour management has come a long way in the last few years. there are still a lot of the old guard who are yet to update their knowledge, and a lot of young guns who are yet to gain it. here’s the first of a couple of posts about colour management in adobe creative suite.

in the olden days (about ten years or so ago) the recommended practice for dealing with colour images was to save at least three copies of a photographic image : one rgb for onscreen, one cmyk corrected for sheet offset, and one cmyk corrected for press (newsprint). the most pedantic operators saved a different correction/conversion for every output scenario their image was destined for (eg. three different papers might have three different output profiles). so, many copies of each image — a wailing and gnashing of teeth — madness reigned.

this was also the time when raster images destined for print were always saved as tifs, unless they had spot colours or clipping paths, then they were saved as eps because it was the only importable file type that could retain such information. but now, of course, you save all your print ready rasters in psd format (you DO, don’t you? … no? then you should).

but back to colour management … de rigueur nowadays is to save raster images in rgb and allow InDesign to do any colour management on the fly. what? blasphemy and anathema to the old guard! page layout programs are for page layout and imaging programs are for images and that’s that. but such contentions are now piffle. there are good reasons why the adobe software is now called creative suite — it’s no longer a bunch of separate programs — it’s now an integrated set with many things in common, including colour conversion algorithms.

so, here’s a little demonstration for the non-believers (click to enlarge) :
screen grab of four versions of one image in InDesign

that’s a screen grab of the same rgb psd placed in four separate InDesign files. each InDesign file is assigned a separate colour profile as indicated by the labels. these are the same four colour profiles that could be assigned permanently through photoshop but, by being assigned to the InDesign files, they DO NOT change the image file (psd) in any way — just the way it is interpreted by InDesign.

assigning a colour profile in InDesign is as simple as choosing convert to profile from your edit menu and choosing the appropriate profile from the relevant dropdown :
screen grab showing convert to profile menu and window with dropdown options

the difference between the four InDesign files is more obvious when we turn on separations preview (windows > output > ) and have a look at some of the numbers. here are the same four files with only the black plates showing (again, click to enlarge) :
screen grab of four versions of one image in InDesign — black plates only

the readings in the separations preview panel come from the black background — which is r0g0b0 in the psd. you can see that fogra 27 allows for a total ink limit (also known as total ink coverage or total area coverage) of 350% and a solid black, whereas swop only allows 300% with 90% black, and poor old newsprint is restricted to 220% and has to pull the black back to 71%. NOTE: these are the exact same numbers you’d get if you did a cmyk conversion of the psd in photoshop.

what does all this mean?
it means that a single image can be sent to multiple output types by simply changing the InDesign profile. you do not need a separate image file for each destination.

now, converting the file to an output profile is not strictly necessary if your final output is pdf — because the conversion can be done at export. but, as the first screen grab shows, doing the conversion gives you a better idea on screen of what your final output is likely to look like.

we’ll have a nice little chat about this topic some more in a future post.

til then, keep grunting.

• related post : InDesign tip : #24 : checking the black plate in separations preview.
• related post : adobe cs — colour #02 : you really need to get your shit together.
• related post : adobe cs — colour #03 : what’s the best colour profile?.

macgrunt icon

upgrade or go to hell

it looks like Adobe are giving their customers the finger — with a recently announced change to their upgrade policy :
“With regards to upgrades, we are changing our policy for perpetual license customers. In order to qualify for upgrade pricing when CS6 releases, customers will need to be on the latest version of our software (either CS5 or CS5.5 editions). If our customers are not yet on those versions, we’re offering a 20% discount through December 31, 2011 which will qualify them for upgrade pricing when we release CS6.”

you can read the full post here : Adobe Creative Cloud and Adobe Creative Suite: New Choices for Customers.

this announcement was made only a month ago — giving users a very small window of opportunity if, indeed, they hear about the change at all.

photoshop guru, Scott Kelby, has published a very polite plea in An Open Letter To Adobe Systems.

let’s hope Adobe are sensible enough to heed the voice of reason.

macgrunt icon